• Mazalna črpalka-DDB10
  • Mlazna črpalka-DDB10 - Večtočkovna črpalka
  • Mazalna črpalka-DDB10-mazalna črpalka za vbrizgavanje

DDB-10 večstopenjska mazalna črpalka

Postavka #: 3077
Max. Delovni pritisk: : 100Bar
Električni motor: 380VAC, 0.37kW, 50 / 60Hz
Grease Tank: 7L
Teža: 38Kgs
Uporaba: Večtočkovna črpalka za mazanje do priključkov za oskrbo z mastjo 10
Lastnosti:
- 1 ~ 10 Na voljo so mazalna vrata
- Grelni rezervoar do 7L, 0.37Kw, 380V elektromotorja
- standardne mere namestitve in daljšo življenjsko dobo
Sorodni izdelek / zamenjava: Injektor črpalke
Tehnični podatki črpalke DDB: PDF DDB črpalka

Kategorija:
  • Opis
  • dimenzije

Opis

Mazalna črpalka DDB-10

Mlazna črpalka DDB-10 je večtočkovna mazalna črpalka za mazanje z izstopnimi odprtinami 10 za mazanje, ki je na voljo za centralno mazanje sistema maziva v majhni, enojni ali progresivni napravi. Konstrukcija mazalne črpalke je vbrizgavanje batov s priključki za mazanje 10 (še manj, lahko ga zapremo, če nekateri pristanišči trenutno niso potrebni), ta mazalna črpalka je običajno povezana s pregradnimi tipi, ki ustrezajo različnim zahtevam mazanja.

Namestitev mazalne črpalke DDB-10 je precej enostavna, s čimer je vsaka črpalka vbrizgana z jeklenim ali plastičnim cevnim priključkom priključena s konektorjem, nato pa vsak odsek za podmazovanje maziva na različne mazalne točke, mazalne cevi pa so pritrjene z zakovicami ali jermeni. Črpalka DDB-10 je na voljo za penetracijsko sredstvo, ki ni manjša od 265 (25, 150g) maščobe 1 / 10mm (NLGI0 # ~ 2 #), priporočena temperatura okolice delovanja pa je boljša med 0 ~ 40.

It is necessary to clean the injector of lubrication pump and inlet port of grease lubrication system before filling grease in the grease reservoir, following the procedures to fill grease in DDB-10 pump and test the motor rotation of lubrication pump and each junction points after the completion of connection between lubrication pump and lubrication system or divider valves. The DDB-10 pump has been proved that multi-point lubrication pump can improve the work efficiency 5-time above if comparing with conventional lubrication methods, saving 2/3 lubricants, reduce maintenance costs about three times, extending service life of wear-out parts, the lubrication pump has characteristics of simple construct, easy to operate and installation, safe working, clean and other characteristics of lubricating oil and no special requirements for routine lubrication maintenance provides an effective way to work , but also for the efficient, fast, energy-efficient and safe for production and construction environment.

Opis mazalne mazalne črpalke:

Mazivo-mazanje-črpalka-DDB18-konstrukt
Seznam delov mazalne črpalke:

1. Električni motor ; 2. Notranji črv; 3. Gredni polžni gredi; 4-5-6. Gears; 7. Ekscentrična gred; 8. Connection Pin; 9. Pogonsko kolo; 10.Internalni bat; 11. Plošča z mastjo; 12. Mešalna palica za mast


Mazalna črpalka DDB-10 Tehnični podatki:

Max. PritiskTočke hranjenjaPotopni bataPrilagodljiv hodVolumen hranjenja
10Mpa1010mm5mm0-0.2 ml / čas
Čas hranjenjaProstornina rezervoarjaMotorTeža
13 čas / min7L0.37Kw, 1380r / min, 380V38Kgs 1232


Mazalna črpalka DDB-10 Dimenzije:

Dimenzije-Dump-DDB-10-dimenzije

Note Of Grease Pump DDB-10 Before Operation:

  1. The multi-point lubrication grease pump DDB-10 should be installed in a place where the ambient temperature is suitable for working operation and small dust, which is convenient for oil or grease filling, adjustment, inspection and maintenance.
  2. The HL-20 gear oil must be added to the gear box to the oil level specified level.
  3. To add grease to pump reservoir the of the DDB-10 grease pump, the SJB-D60 manual fuel pump or the DJB-200 electric grease filling pump must be used to fill the grease to the pump reservoir of the DDB-10 grease pump. It is strictly forbidden to start the motor when there is no grease or oil in the reservoir.
  4. According to the arrow direction of rotation on the cover of the electric motor, the motor should be connected with stable wire and not reversed.
  5. The accuracy of the filter screen is not less than 0.2mm and should be cleaned regularly.
  6. The grease pump DDB-10 should be kept clean at all times. It is strictly forbidden to remove the reservoir cover, to prevent dirt from entering the pump chamber and affecting normal work.
Mazalna črpalka DDB-10 Dimenzije:Dimenzije-Dump-DDB-10-dimenzije
napaka:
GTranslate Your license is inactive or expired, please subscribe again!